PADS Layout Copper Pour (2층)

Tools -> Verify Design -> Clearance 체크 -> Start (Error 가 없어야 함)

Tools -> Verify Design -> Connectivity 체크 -> Start (GND 제외 Error 가 없어야 함)

 

아이콘에 Drafting Toolbar -> Copper Pour -> GND 영역 네모 그리기 -> Width 0.3 -> Layer Top -> To ~ GND -> Apply -> OK -> Copper Pour -> GND 영역 네모 그리기 -> Width 0.3 -> Layer Bottom -> To ~ GND -> Apply -> OK 

 

Tools -> Pour Manager ->  아래 네모칸 테크 해제 후 start -> Tools -> Verify Design -> Clearance , Connectivity 체크

 

Tools -> Options -> Thermals -> SMT Thermals -> Round pad, Square pad, Rectangle pad, Oval pad 모두 Orthogonal 

 

Tools -> Options -> Via Patterns -> Add -> 깔 Nets 선택 -> Via Type STANDARDVIA -> Via Spacing 1.27 -> Apply

 

우클릭 -> Select Shapes -> 앞면, 뒷면 순서대로 Pour 선택 -> Via Stitch